This unique mount supports mounting the Electronic Tool Setter (ETS) on the T-Slot table or a 1.25 spaced Fixture plate offered by multiple vendors. Bolt Holes are spaced 1.25 by 2.5 and are a tight clearance for 1/2-13 cap screws.  The mounting pattern for the ETS assembly is a bolt circle with mounting positions at every 45 degrees allowing the user to position the wire in an optimal location for their setup.

Included with purchase:

(1x) ETS Mount

(2x) Cap Screws 8-32 x 1 to attach ETS onto Mount 

Due to various mounting hardware length options customer will have to supply the 1/2-13 Cap Screws to attach to the machine.

NOTE FOR OFF BRAND ETS

While the design was always intended for the Tormach brand ETS we have found that the China copies can be mounted with a modification to increase the ETS mounting hole size from 4.5 to 5mm or 13/64 inch, also due the difference in flange thickness the buyer will need to shorten the 8-32 screws supplied or purchased 8-32 x 3/4 cap screws separately.